Darlex Insecticide for Darkling Beetles 2026 03 22

When treating for Darkling Beetles, what is the required dilution range for 4 fl. oz. of product to treat 1,000 sq. ft.?

• 1 gallon of water
• 1/2 to 2 gallons of water ✓
• 2 to 4 gallons of water
• 5 gallons of water

Answer: For Darkling Beetles, the label states to mix 4 fl. oz. in 1/2 to 2 gallons of water to treat 1,000 sq. ft.

🔗 Source

Which application method is strictly prohibited for this product?

• Band Application
• Interior Broadcast Application
• Spot treatment
• Fog or space-spray ✓

Answer: The restrictions explicitly state: 'Do not apply as a fog or space-spray.'

🔗 Source

What must be done with exposed water lines and feed troughs before beginning treatment?

• They must be cleaned with disinfectant.
• They must be covered or removed from the area. ✓
• They must be sprayed with a diluted mixture.
• They must be moved to a different poultry house.

Answer: The restrictions state that exposed water lines and feed troughs must be covered or removed from the area before treatment begins.

🔗 Source

Which of the following is a target pest for Darlex Insecticide according to the label?

• Darkling Beetles ✓
• Cockroaches
• Ants
• Flies

Answer: The label explicitly lists Darkling Beetles and Bed Bugs as target pests.

🔗 Source

According to the application notes for Darkling Beetles, how wide should the swath be when performing a Band Application?

• 1 to 2 feet
• 2 to 3 feet
• 3 to 5 feet ✓
• 5 to 10 feet

Answer: The label instructions for Band Application specify applying the diluted product to a 3 to 5 foot wide swath of floor area.

🔗 Source

When is the appropriate timing to apply Darlex Insecticide?

• During the middle of a flock cycle.
• Immediately after new flock placement.
• After de-caking, clean out and sanitation procedures are complete but prior to new flock placement. ✓
• Only when plants in the area are in bloom.

Answer: The label specifies applying after de-caking, clean out and sanitation procedures are complete but prior to new flock placement.

🔗 Source

When preparing the diluted spray for Darkling Beetles, what is the correct mixing procedure?

• Fill the tank with all water, then add the insecticide.
• Fill the sprayer tank with half the total water, add the insecticide, then add the remaining water while agitating. ✓
• Mix the insecticide and water in a separate bucket before pouring into the sprayer.
• Add the insecticide to the tank first, then add all the water at once.

Answer: The mixing notes instruct to fill the tank with half the total water, add the insecticide, then add the remaining water while agitating.

🔗 Source

To avoid harming pollinators, what restriction must be followed regarding plants?

• Do not apply near any vegetation.
• Do not allow the product to contact plants in bloom if bees are foraging in the area. ✓
• Only apply when plants are dormant.
• Ensure all plants are covered with plastic before application.

Answer: The label states: 'Do not allow this product to contact plants in bloom if bees are foraging the treatment area.'

🔗 Source