Hex Pro Termite Bait System

If you need to prepare 100 gallons of solution at a 0.10% finished strength, how much PROTHOR SC 2 is required?

• 55.0 ✓
• 27.5
• 13.8
• 6.90

Answer: The mixing table states that 55.0 of PROTHOR SC 2 is required for 100 gallons at 0.10% finished strength.

🔗 Source

When applying the product to create horizontal barriers, what is the required application rate?

• One gallon of solution per 10 square feet ✓
• Four gallons of solution per 10 linear feet
• One gallon of solution per 10 linear feet
• Ten gallons of solution per 100 square feet

Answer: The label specifies a rate of one gallon of solution per 10 square feet for horizontal barriers.

🔗 Source

What is the target pest for the Hex Pro Termite Bait System?

• Termite ✓
• Ants
• Cockroaches
• Fleas

Answer: The label facts state the target pest is termite.

🔗 Source

How much PROTHOR SC 2 is needed to make 500 gallons of 0.05% finished strength solution?

• 138 (1 gallon + 10 ounces) ✓
• 275.0 (2 gallons + 19 ounces)
• 6.90
• 13.8

Answer: The mixing instructions specify 138 (1 gallon + 10 ounces) for 500 gallons at 0.05% strength.

🔗 Source

To achieve a finished strength of 0.10% using Proportional Injector Mixing, how much PROTHOR SC 2 should be used per 1 gallon?

• 0.6 ✓
• 0.3
• 0.55
• 1.10

Answer: According to the mixing notes for Proportional Injector Mixing, 0.6 of PROTHOR SC 2 is used per 1 gallon for a 0.10% strength.

🔗 Source

What is the allowable dilution range for the Hex Pro Termite Bait System?

• 0.05% to 0.10% ✓
• 0.10% to 0.50%
• 0.01% to 0.05%
• 1.0% to 2.0%

Answer: The label facts list the dilution range as 0.05% to 0.10%.

🔗 Source

What restriction applies to structures that contain wells or cisterns within the foundation?

• They can only be treated using the treated backfill method described in the treatment around wells and cisterns section ✓
• They cannot be treated with Hex Pro Termite Bait System
• They must be treated with a 0.05% dilution only
• They require a horizontal barrier only

Answer: The label restrictions state that structures with wells or cisterns in the foundation can only be treated using the specific treated backfill method described in the label.

🔗 Source

What is the application rate for vertical barriers per 10 linear feet per foot of depth?

• Four gallons of solution ✓
• One gallon of solution
• Ten gallons of solution
• 0.10 gallons of solution

Answer: The label states the rate for vertical barriers is four gallons of solution per 10 linear feet per foot of depth.

🔗 Source