Maxforce Fly Spot Bait

When using the 2 ounce packet for a spray application, how much water should be used to mix with one packet?

• 1 pint of water ✓
• 1 gallon of water
• 8 ounces of water
• 16 ounces of water

Answer: The mixing instructions specify: 'one 2 ounce packet [per] 1 pint of water' for spray applications.

🔗 Source

When applying the spray version, how much area will one gallon of finished spray treat?

• 500 sq ft
• 1,000 sq ft ✓
• 5,000 sq ft
• 10,000 sq ft

Answer: The mixing notes for spray applications state: 'One gallon of finished spray will treat 1,000 sq ft of surfaces where listed flies may rest.'

When using the paint-on application method, how wide should the bands be applied?

• Up to 3 inches wide
• Exactly 12 inches wide
• Up to 6 inches wide, or more ✓
• No more than 1 foot wide

Answer: The label instructions for paint-on applications specify painting the product in small bands up to 6 inches wide, or more.

According to the label, what is the maximum application rate for Maxforce Fly Spot Bait?

• 8 ounces per 1,000 sq ft of floor space ✓
• 16 ounces per 1,000 sq ft of floor space
• 8 ounces per 500 sq ft of floor space
• 1 ounce per 100 sq ft of floor space

Answer: The label states: 'Do not apply this product at a rate exceeding 8 ounces for every 1,000 sq ft of floor space.'

🔗 Source

In which of the following locations is Maxforce Fly Spot Bait approved for use?

• Directly on animals and feed
• On milking equipment
• Non-food/non-feed areas of commercial food handling establishments ✓
• On surfaces that people frequently contact

Answer: The label allows use in non-food/non-feed areas of commercial food handling establishments, but restricts spraying on animals, feed, milking equipment, or frequently contacted surfaces.

If a technician is treating an animal confinement facility, which of these is a listed target pest?

• Listed flies ✓
• Cockroaches
• Mosquitoes
• Bed bugs

Answer: The label identifies the target pest for all listed applications as 'listed flies.'

🔗 Source

In a commercial food handling establishment, where is application of this product permitted?

• In all areas including serving areas
• Only in non-food/non-feed areas ✓
• In serving areas when the facility is in operation
• On any surface where flies aggregate

Answer: The restrictions state that applications in food/feed handling establishments are permitted ONLY in non-food/non-feed areas.

🔗 Source

When using the spray application method, what is the correct dilution rate?

• 8 ounces of product to 8 ounces of water
• 16 ounces of product to one gallon of water ✓
• 4 ounces of product to one gallon of water
• 16 ounces of product to 1,000 sq ft

Answer: The label states for spray applications to use 16 ounces of this product to one gallon of water.