VamPyre Misting High Powered Botanical Pyrethrum 2026 03 22

To protect beef cattle, dairy cattle, and horses from Stable Flies, what is the mixing requirement for a 0.50% Pyrethrins finished strength?

• 4.3 fl. oz. per gallon of water
• 1.6 fl. oz. per 1,000 cu. ft.
• 22 fl. oz. per gallon of water ✓
• 0.5 fl. oz. per tray

Answer: According to the mixing facts, 22 fl. oz. per gallon of water is required for a 0.50% Pyrethrins finished strength for Stable Flies on livestock.

🔗 Source

When applying the product to peanuts, nuts, beans, or seeds in bulk or bags, how should the space spray be directed?

• Directly onto the center of the bags.
• Toward the floor and under the pallets.
• Toward the ceiling and upper corners of the area and behind any obstructions. ✓
• In a circular motion around the storage bins.

Answer: The label instructions for seeds/nuts/beans state to apply as a space spray by directing the spray toward the ceiling and upper corners of the area and behind any obstructions.

🔗 Source

What is the Re-entry Interval (REI) instruction for this product?

• Ventilate for 24 hours before re-entry.
• Leave the room closed for one hour. ✓
• Wait two to three weeks before re-entry.
• Do not re-enter until the mist has completely settled.

Answer: The label specifies the REI instruction as: 'Leave the room closed for one hour.'

🔗 Source

In animal quarters, what is a specific restriction regarding the use of the product in milk rooms?

• Do not use in milk rooms where raw milk may be exposed. ✓
• Do not spray near milk buckets.
• Do not use in milk rooms during milking hours.
• Do not apply to milk cans or containers.

Answer: The label explicitly states: 'Do not use in milk rooms where raw milk may be exposed.'

🔗 Source

According to the label, what must be done with exposed food products and packaging materials before use?

• They must be moved to a different building.
• They must be covered or removed. ✓
• They must be sprayed with a 0.10% solution.
• They must be placed in airtight containers.

Answer: The restrictions section states: 'Before use, cover or remove exposed food products and packaging materials.'

🔗 Source

What is the required dilution rate for using the product for in-transit protection?

• 0.10% or 0.50% concentration
• 1 gallon per 750 sq. ft. ✓
• 1.6 fl. oz. per 1,000 cu. ft.
• 22 fl. oz. per gallon of water

Answer: For in-transit protection, the label specifies a rate of 1 gallon per 750 sq. ft.

🔗 Source

When applying VamPyre Misting High Powered Botanical Pyrethrum to dried fruit products in storage or processing, how should the product be applied?

• Apply as a fine mist or fog in the air above and around trays, bins, and shelves. ✓
• Apply directly to the surface of the fruit to ensure total coverage.
• Spray only the floor and walls of the storage area.
• Apply as a heavy liquid soak on all fruit packaging.

Answer: The label states to apply as a fine mist or fog in the air above and around trays, bins, and shelves, and explicitly instructs not to apply directly to fruit.

🔗 Source

When treating federally inspected meat and poultry plants, under what condition should the product be used as a space spray?

• Only during the night shift
• Only when the plant is in operation
• Only when the plant is not in operation ✓
• Only after all livestock have been removed

Answer: The label restriction states to use as a space spray only when the plant is not in operation.

🔗 Source